BCDHK - THINNER, T-9035

Product Identification

Product ID:THINNER, T-9035
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001618
MSDS Number: BCDHK

Responsible Party
E.I. DUPONT NEMOURS & COMPANY,INC
1007 MARKET STREET
WILMINGTON, DE 19899
US

Emergency Phone: 800-441-7515

Info Phone: 800-441-7515

Cage: EO715

Contractor
E.I. DUPONT NEMOURS/WILMINGTON, DELAWARE 19898
WILMINGTON, DE 19898 US

Telephone: 800-441-7515;800-441-9442

Cage: EO715

Ingredients

METHYL PYRRLIDONE; CAS#872-50-4

CAS: 872-50-4

RTECS: UY5790000

Fraction By Weight: 50.0%

ACGIH TLV: 25 PPM(MFR)


2-ETHOXYETHANOL (EGEE) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: 50.0%

OSHA PEL S,200 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:CAUSES HEADACHE,NAUSEA,IMPAIRMENT OF READRION
TIME AND COORINATION.

First Aid

First Aid:INHALATION:MOVE TO FRESH AIR TO IMPROVE BREATH;SKIN:WASH WITH
SOAP & WATER.REMOVE CONTAMINATED CLOTHING;EYES:FLUSH WTH WATER FOR
AT LEAST 15 MIN.CALL A PHYSICIAN.

Fire Fighting

Flash Point:100F-140F-(CC)
Lower Limits:1.8
Upper Limits:15.7
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:COOL CLOSED CONTNRS W/H*20 USING FOG NOZZLES.

Accidental Release

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS & OPEN
FLAMES.CLOSE CONTAINERS AFTER EACH USE. DO NOT STORE ABOVE 120F
Other Precautions:WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING OR
SMOKING;OBSERVE LABEL PRECAUTIONS;CONTAINERS SHOULD BE GROUNDED
WHEN POURING.

Exposure Controls

Respiratory Protection:USE ADEQUATE VENTILATION;USE CARTRIDGE-TYPE RESP
IAW DIRECTIONS.
Ventilation:LOCAL & MECH PROVIDE SUFFICIENT VENT TO KEEP BELOW TLV
LEVEL
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:USE APPROPRIATE INDUSTRIAL HYGIENE
PRACTICES.
Supplemental Safety and Health
MSDS FM MFR DATED:09/01/82;VAPOR PRESSURE <1.0 & VAPOR DENSITY 3.4
NOTED BY MFR ARE OF PRINCIPAL SOLVENT;PER MFR FLASH POIT LIMITS ARE
>100F BUT <140F.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:270-395F
Vapor Pres:<1.
Vapor Density:3.4
Spec Gravity:0.972
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MODERATE
Appearance and Odor:CLEAR LIQUID;STRONG SOLVENT
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, CORROSIVES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CO,CO*2,SMOKE

Disposal

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.